[Ian_A]

I have a greenhouse (Halls 10x8 ft) and would like to connect the water butt to it if possible. However, in the 2 garden centres I went to they didnt have the connectors needed and couldnt advise exactly what connectors should be used. The sides of the greenhouse - where it meets the roof - have grooves/runners for water to fall into from the roof and rectangular ends.

One of the garden centres seemed to think the right attachments could be found online but I have had no luck so far.

Any help is gratefully received, thanks

[prakash_mib]

picture of your current setting would greatly help. and I feel that you can find the attachement you want at online.

[savbo]

if you don't have any joy getting the correct gutter connectors, you can do what I've done and rig up a drainpipe diverter (that came with the waterbutt) under the gutter using cable ties/wire/gaffer tape.  In fact back in Derry I didnt have the diverter and used the neck of a milk bottle fixed to a hose pipe...

[savbo]

is this what you need?
http://www.hallsgreenhouses.co.uk/Rainwater_Kit_for_8ft_wide_Halls_Popular_Universal_or_Magnum.htm

[scabs]

you can do what I've done and rig up a drainpipe diverter (that came with the waterbutt) under the gutter using cable ties/wire/gaffer tape.  

That's what I did, using the flexible hose from the diverter kit and some Duck tape... works a treat. 

[Aidy]

I just siliconed some 15mm copper pipe to the gutter and connected that with hose to the butt.

[peterjf]

a plumbing centre will sort you with the connector and the piping , £ 2-3  per water butt

[Ian_A]

thanks for the advice. And I can't even get my measurements right  - it's 8x6ft - which I also see can be bought at the hallsgreenhouses website sabvo posted (thanks).

And like buses all coming at once after nothing, I have also found another link for a generic one which might work - cheaper than Halls website.
http://www.greenfingers.com/superstore/product.asp?dept_id=6007&pf_id=LS0665D