[CAL]

Can anyone recommend a weld mesh supplier in the Barnsle / Sheffield area?

I nned to reinforce the cooop and run...

Thanks.

[joyfull]

It depends on if you want it by the roll or in 8 x 4 sheets. Sheets will be thicker mesh but will be very expensive. If you want sheets then check out your local steel stockholders - there is a Barclay and Mathieson ltd on Coleford Road, Sheffield. But if you want mesh on a roll which is the most cost effective way then try Hills of Devon who offer a fantastic service and next day delivery 

[4chooks]

b&q do it by the roll as well as the normal chicken wire!

[Judd]

I'm a Welder/fabricator and I use Hilsborough steel stockists for steel supplies.
I don't know if they stock Weldmesh but they're the cheapest I've found.

[joyfull]

yes they do - both sheets and on the roll but the rolls are 60 feet in length and they come in 4 feet, 6 feet and 7 feet widths (according to their website  ).

[Judd]

I've found them very helpful and they do have a cutting service.

[compostqueen]

Torne Valley is nearby and stocks all that sort of stuff

[CAL]

I ended up using Hills of Devon.  They were advertising just the right length roll of mesh with a very reasonable delivery charge on an certain auction site....

Now I have an industrial stapler I can get cracking this weekend.

[mr.mellow]

Try mesh direct on http://www.meshdirect.co.uk/home.php. A very quick service that I can recommend.