[Paul Plots]

Now for sure grasshoppers have knees but my dahlias don't do a lot of bending down so their's are less evident... 

[Yabba]

I normally cheat and glue a grasshopper ( not a live one ... just in case the thought police are active ) to each dahlia ( about arms length down from my height ... I don't want a dodgy back huh? ) ... then I snip them off just above that

¥

[Paul Plots]

I normally cheat and glue a grasshopper ( not a live one ... just in case the thought police are active ) to each dahlia ( about arms length down from my height ... I don't want a dodgy back huh? ) ... then I snip them off just above that

¥

There we go - I stand to be informed correctly  I thought it was a measurement of how high a grasshopper could hop = "knee height"  :blink: 

[Yabba]

Well, if you don't glue them well enough, they're certainly able to hop from that height to ground level :roll:

¥

[Paul Plots]

Well, if you don't glue them well enough, they're certainly able to hop from that height to ground level :roll:

¥

No need to cover with environmesh then if every little critter is glued on!