Sad 'n Sorry Cedar Greenhouse

  • 4 Replies
  • 1942 Views
*

TurfSmurf

  • New Member
  • *
  • Location: Small village in South East Kent
  • 10
Sad 'n Sorry Cedar Greenhouse
« on: November 01, 2011, 17:09 »
I have an old Alton cedar greenhouse that has suffered due to lack of maintenance and so now needs to have some of the cedar bits replaced - but the cost of the replacements are astronomic!!! does anyone have any good ideas for repairs - I am pretty nifty at woodwork so I can make up parts, but I am not sure of the wood that I should use etc.  It is not the complete sections that needs to be replaced - just some of the bars in the section.  Any ideas for getting economic cedar?

*

ex-cavator

  • Senior Member
  • ****
  • Location: Banbury, Oxfordshire
  • 625
Re: Sad 'n Sorry Cedar Greenhouse
« Reply #1 on: November 01, 2011, 19:49 »
I guess any hardwood would be OK, but hardwood isn't going to be cheap. You could try an architectural salvage merchants, but would it be as cheap (and a lot easier) to find a similar secondhand greenhouse on fleabay and do a cut and shut job?  :)

*

Trillium

  • Guest
Re: Sad 'n Sorry Cedar Greenhouse
« Reply #2 on: November 01, 2011, 21:13 »
Would treated lumber not work? You say you have just small sections to fix, so treated pcs might not be too noticeable.

*

sunshineband

  • Global Moderator
  • Hero Member
  • *****
  • Location: Reading, Berkshire
  • 32056
  • Tallest Sunflower prizewinner 2014
    • A Little Bit of Sunshine
Re: Sad 'n Sorry Cedar Greenhouse
« Reply #3 on: November 02, 2011, 07:24 »
Would treated lumber not work? You say you have just small sections to fix, so treated pcs might not be too noticeable.

Go have a squint round your local DIY store --- a single length od hradwood shouldn't set you back a fortune, and you might even get some the right width to start with.

Look in the section realted to decking too, as there is usually hard wood there as well as traeted pine/deal
Wisdom is knowing what to ignore - be comfortable in your own skin.
My Blog
My Diary
My Diary Comments

*

Gwiz

  • Guest
Re: Sad 'n Sorry Cedar Greenhouse
« Reply #4 on: November 03, 2011, 16:54 »
I think I'd make it out of treated timber and then once made, let it soak for a few days in some cuprinol before fitting it.


question
Used greenhouse

Started by Windsong on Design and Construction

11 Replies
5799 Views
Last post March 29, 2011, 17:08
by Trillium
xx
eco greenhouse

Started by gladis on Design and Construction

13 Replies
5656 Views
Last post February 24, 2011, 15:19
by grinling
xx
I've been given a greenhouse!

Started by potatopotato on Design and Construction

17 Replies
10467 Views
Last post January 25, 2008, 20:15
by Cynara
xx
DIY Greenhouse

Started by digital_biscuit on Design and Construction

11 Replies
7387 Views
Last post August 15, 2007, 15:56
by GrannieAnnie
 

Page created in 0.153 seconds with 37 queries.

Powered by SMFPacks Social Login Mod
Powered by SMFPacks SEO Pro Mod |