Merry Tiller help...

  • 6 Replies
  • 4720 Views
*

Sadgit

  • Village Idiot
  • Hero Member
  • *****
  • Location: Middlesbrough
  • 2311
    • Middlesbrough Weather
Merry Tiller help...
« on: March 07, 2008, 11:46 »
my stringy thing that I pull to start the engine on my rotorvator has snapped.. what do i need to look for as a replacement? you can see i know all the technical names for these things...  :oops:  :oops:

Also, the metal skiddy thingy at the back that you put on instead of the wheels when turning the soil, do you have it longer or shorter to dig deeper?

I feel such a fool asking these question you know...

Cheers
SG

*

Gwiz

  • Guest
Merry Tiller help...
« Reply #1 on: March 07, 2008, 12:39 »
your stringy thingy (recoil start) is part of the engine housing (if a briggs engine).
Its held on by four (sometimes three) 10mm headed bolts (or the imperial size 9/16) take it of, and buy a new recoil rope. Dont remove the recoil pulley, as there is a spring behind it that is under tension. put a knot in one end of the string. remove all of the old string from the pulley. pre tension the recoil pulley by winding it in the same direction it goes when you pull the rope out to start it ( about 4 to five turns) line up the hole that the string goes through on the pulley, with the one the rope goes through in the side of the housing, and push the unknotted end through the pulley and out of the housing. fit the recoil handle, and let trhe pulley wind itself back slowly.
refit and go dig the allotment. the skid is lowered into the soil to dig deeper.
enjoy. :wink:

*

Sadgit

  • Village Idiot
  • Hero Member
  • *****
  • Location: Middlesbrough
  • 2311
    • Middlesbrough Weather
Merry Tiller help...
« Reply #2 on: March 07, 2008, 15:51 »
Nice one.. thanks Graham

So any of these will do the jobbie?

http://search.ebay.co.uk/search/search.dll?from=R40&_trksid=m37&satitle=recoil+rope

*

shaun

  • Hero Member
  • *****
  • Location: g.sutton/cheshire
  • 6948
Merry Tiller help...
« Reply #3 on: March 07, 2008, 16:19 »
all these jobs should have been done in the winter,oil change,filter change or washed out with petrol,all moving parts greased and lubed up,discard last years fuel and replace with new,chech your pull cord for damage  :roll:  :wink:
feed the soil not the plants
organicish
you learn gardening by making mistakes

*

shaun

  • Hero Member
  • *****
  • Location: g.sutton/cheshire
  • 6948
Merry Tiller help...
« Reply #4 on: March 07, 2008, 16:20 »
ohh sadgit you can buy pull cord from most hardware shops by the metre

*

Sadgit

  • Village Idiot
  • Hero Member
  • *****
  • Location: Middlesbrough
  • 2311
    • Middlesbrough Weather
Merry Tiller help...
« Reply #5 on: March 07, 2008, 18:08 »
Quote from: "shaun"
all these jobs should have been done in the winter,oil change,filter change or washed out with petrol,all moving parts greased and lubed up,discard last years fuel and replace with new,chech your pull cord for damage  :roll:  :wink:


yeah err yeah.. I did err none of those things.. only just worked out how to top up the petrol.. filter you say? like a coffee filter? Seriously I have no idea about stuff like this, I am an IT manager, so what do I know :)

*

Sadgit

  • Village Idiot
  • Hero Member
  • *****
  • Location: Middlesbrough
  • 2311
    • Middlesbrough Weather
Merry Tiller help...
« Reply #6 on: March 17, 2008, 09:03 »
Thanks for the help.. I managaed to get some rope stuff and all fitted and works like a dream now. Well it did conck out after 30 mins on Friday and I couldn't work out what was wrong with it...

Err The petrol tank was bone dry.. oops :D


xx
merry tiller and mantis tiller - compare/contrast?

Started by mushroom on Equipment Shed

7 Replies
9405 Views
Last post July 17, 2007, 05:17
by Gwiz
xx
please help merry tiller

Started by riche100 on Equipment Shed

7 Replies
3454 Views
Last post April 28, 2017, 09:36
by riche100
clip
Merry Tiller

Started by glenforkie on Equipment Shed

11 Replies
8978 Views
Last post February 26, 2014, 15:57
by Swed
xx
merry tiller

Started by muntjac on Equipment Shed

2 Replies
2000 Views
Last post September 02, 2007, 17:19
by Bigbadfrankie
 

Page created in 0.117 seconds with 29 queries.

Powered by SMFPacks Social Login Mod
Powered by SMFPacks SEO Pro Mod |