Howard Gem JAP motor oil connections

  • 1 Replies


  • Newbie
  • *
  • 1
Howard Gem JAP motor oil connections
« on: August 28, 2012, 03:48 »
Hello everyone -- first post here, from NZ
I've a Howard Gem with a JAP motor (serial 93000/5 on cowl plate).  Unfortunately the fuel and oil pipes have been removed. The fuel one is easy to follow, from tank to carby. There appear to be three oil-related connections at the bottom-front of the engine.  Viewing from the front, there are two visible, both expecting a feed-in (our out) from the left side (let's call them 'right' and 'middle').  And there is one more connection around to the left that's not visible from front viewing and pointing directly left (call this one 'hard-left'). One of these must be connect to the down-pointing outlet from the oil filter. Which one - right, middle or hard-left?  And where do the others lead to or come from?  Any assistance welcomed. With thanks, JohnK



  • Global Moderator
  • Hero Member
  • *****
  • Location: North Yorkshire
  • 24622
Re: Howard Gem JAP motor oil connections
« Reply #1 on: August 31, 2012, 18:55 »
Welcome to the site  :D

I'll move you over to the techy side of the forum  :)
I try to take one day at a time, but sometimes several days all attack me at once...

Soaker hose connections?

Started by adri123 on Equipment Shed

1 Replies
Last post February 28, 2014, 17:27
by cadalot
Flymo XLT250 petrol-powered grass trimmer - carburettor connections?

Started by charlievictorbravo on Equipment Shed

3 Replies
Last post May 06, 2009, 19:25
by Gwiz
Could anyone identify my model and motor? Please

Started by billynomates on Equipment Shed

4 Replies
Last post February 24, 2013, 19:54
by billynomates
mcculloch gladiator 550 gear motor

Started by massa on Equipment Shed

1 Replies
Last post August 13, 2010, 15:13
by TheEnglishman

Page created in 0.117 seconds with 35 queries.

Powered by SMFPacks Social Login Mod
Powered by SMFPacks SEO Pro Mod |