help needed with a qualcast b66 cultmatic

  • 8 Replies
  • 336 Views
*

jayray

  • Newbie
  • *
  • Location: bulgaria
  • 5
help needed with a qualcast b66 cultmatic
« on: May 15, 2019, 18:21 »
Hi I have a b66 and it's been over heating with lots of smoke after it been running for about ten minutes, so I started stripping the engine down last night ( this is a first for me working on engines ) I have taken the pistons out and cleaned them ect and then I got a bit braver and decided to take the side panel off at the bottom of the engine , but when I opened it , in the bottom there was a plastic gear in three parts and some metal Pieces's , I'm not shore what they are but mite be the oil flicker thing . But I can't find no plans or drawings on the internet to find out for definite. i moved to Bulgaria from UK seven years ago and I've taken my b66 to four different mower repair shops today and they can't help as they have never seen one before so is here a online place for parts or do any of you have some parts n the back of your sheds. Thanks. Also what a great site this is , I showed it to my wife last night and she been looking at it most of the day .
IMG_20190515_154805.jpg
IMG_20190515_154818.jpg

*

smud6ie

  • Senior Member
  • ****
  • Location: Monmouthshire SE Wales
  • 533
Re: help needed with a qualcast b66 cultmatic
« Reply #1 on: May 16, 2019, 05:10 »
The broken gear and centrifugal weights are parts from the engine governor 

*

jayray

  • Newbie
  • *
  • Location: bulgaria
  • 5
Re: help needed with a qualcast b66 cultmatic
« Reply #2 on: May 16, 2019, 21:42 »
Thank you , at least I know what the  parts are now. Just need to find some spairs for the old girl now and a  manual or photos so  I know how to refit Them. or if someone can tell me what motor it is . Thank for your help.will put another photo of the engine .

*

jayray

  • Newbie
  • *
  • Location: bulgaria
  • 5
Re: help needed with a qualcast b66 cultmatic
« Reply #3 on: May 16, 2019, 21:45 »
Photo
IMG_20190514_185040.jpg

*

jayray

  • Newbie
  • *
  • Location: bulgaria
  • 5
Re: help needed with a qualcast b66 cultmatic
« Reply #4 on: May 16, 2019, 21:47 »
Photo 2
IMG_20190514_202145.jpg

*

R Tallentire

  • Experienced Member
  • ***
  • Location: Lancaster
  • 182
Re: help needed with a qualcast b66 cultmatic
« Reply #5 on: May 17, 2019, 20:10 »
The engine is a Qualcast mower engine, made by them. There were a couple of different sizes and the smaller one is more common than this A114C model.
A114c.jpg
R Tallentire

*

jayray

  • Newbie
  • *
  • Location: bulgaria
  • 5
Re: help needed with a qualcast b66 cultmatic
« Reply #6 on: May 18, 2019, 19:18 »
Thanks for the plans that's looks like mine so just need to find some parts now. Iand thanks one's again for all you help.

*

jezza

  • Experienced Member
  • ***
  • 409
Re: help needed with a qualcast b66 cultmatic
« Reply #7 on: June 04, 2019, 20:12 »
hello give a company called briggs bits a try find the model code and type  on the engine cowling  it will take you to a parts list then call the company and speak to the man there he's very helpful Briggs bits is owned by Briggs and Stratton   jezza

*

R Tallentire

  • Experienced Member
  • ***
  • Location: Lancaster
  • 182
Re: help needed with a qualcast b66 cultmatic
« Reply #8 on: June 05, 2019, 12:41 »
That isn't a B & S engine, it is a Qualcast engine, fitted to lots of Qualcast, Suffolk, Atco and Webb mowers in the 1980s. Spares should be no problem in the UK, a complete used mower can make under 30, but in Bulgaria I suspect they will be difficult to get.



xx
Qualcast cultimatic help needed

Started by qualcast novice on Equipment Shed

0 Replies
975 Views
Last post April 18, 2011, 21:54
by qualcast novice
xx
Qualcast B66

Started by newellan on Equipment Shed

6 Replies
2530 Views
Last post February 26, 2011, 11:12
by aardvark
xx
Qualcast B66

Started by portcullis on Equipment Shed

9 Replies
5476 Views
Last post June 08, 2010, 20:07
by portcullis
clip
Qualcast Cultimate B66

Started by tinkertailor2002 on Equipment Shed

2 Replies
835 Views
Last post April 30, 2015, 10:09
by tinkertailor2002
 

Page created in 0.135 seconds with 35 queries.

Powered by SMFPacks SEO Pro Mod |