[oldjb]

I have just been given a Howard 350 that has been out in the open for many years. The engine is free (although I havent attempted starting it).
The main problem seems to be that it seems to be in gear. The change rod doesnt move much and so cannot get it into neutral. The rotors also seem engaged as they wont turn.
Any ideas where to start ?

[Gwiz]

It might be that the clutch is rusted/stuck. if you have a look here:
http://www.allotment-garden.org/assets/rotovator/HOWARD-300_350-Service-Repair-manual.pdf
It may help. It might also be that the gearbox has become full of rain water and rusted everything up.
You may be looking at a strip down to get it going again.

[oldjb]

It might be that the clutch is rusted/stuck. if you have a look here:
http://www.allotment-garden.org/assets/rotovator/HOWARD-300_350-Service-Repair-manual.pdf
It may help. It might also be that the gearbox has become full of rain water and rusted everything up.
You may be looking at a strip down to get it going again.

Thanks, I have taken the belt off so it cannot be the clutch. Not looking forward to a strip down !!