[savbo]

Hi all

We've just put up the frame of a 12x8 greenhouse I got cheap. It's on a base of breeze blocks set on sand (not mortared) with screws through the frame into the blocks. It all feels fairly secure but the door frame is rather wobbly - we've left the channel that the bottom of the door runs in hanging over the edge of the blocks as it's slightly lower than the rest of the frame. Should we screw the two sections of channel either side of the door opening to a piece of tanalised timber to ensure the door slides into the channel? Or does anyone have any better suggestions?

Michael

[Gwiz]

I can't think of any reason why you shouldn't...