Allotment Gardening Advice Help Chat
Chatting => Equipment Shed => Topic started by: mitzygolf on April 07, 2020, 14:49
-
Hi I am working on a Villiers C12 fitted to a Howard 200 rotavator and can't get a spark all the connections look good and I'm getting a reading of 5.4 ohm on the coil. Is that reading ok? If so any ideas? Photo attached.
-
Hello the coil might need cleaning a rub with emery cloth should do it the points may need cleaning and setting if it's not positioned on the flywheel correctly it won't spark , try MEETENS if you still have problems jezza