Allotment Gardening Advice Help Chat
Chatting => Design and Construction => Topic started by: roonyin on February 20, 2012, 19:25
-
has anyone got any ideas on how i can bring my decking back to its former glory,any thoughts on stripping cleaning and sealing it would be much appreciated
-
Jet wash and then get some deck seal..... the main building yards will tell you what to use... you can also get a cleaner to remove all the muck of it before you jet wash
Somthing like this B&Q SELL IT
http://www.cuprinol.co.uk/products/decking_cleaner_overview.jsp
Here is the info you need
http://www.cuprinol.co.uk/decking/decking_restore.jsp
-
as always, when using a pressure/jet washer don't get too close to the surface you are blasting. Start far away and slowly move closer until a couple of passes is enough to clean it. Don't be tempted to go a couple of inches from the deck to clean it fast as any big splinters that are starting, or other small damage can be ripped straight out of the plank.
For the initial clean a good old fashioned broom is good but a proper, stiff bristle scrubbing brush is better. Try and get into the gaps between the planks if possible as well.
Hope this helps
-
also you can use these
LINK (http://www.google.co.uk/products/catalog?hl=en&q=decking+wire+brush&gs_sm=3&gs_upl=5411l5951l1l6246l5l5l0l0l0l2l117l514l2.3l5l0&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&biw=1280&bih=899&um=1&ie=UTF-8&tbm=shop&cid=5255215623377022614&sa=X&ei=5HdDT9DHE4bJ0QXRuKmPDw&ved=0CGgQ8wIwBA)