rotovator help

  • 65 Replies
  • 20158 Views
*

shaun

  • Hero Member
  • *****
  • Location: g.sutton/cheshire
  • 6948
rotovator help
« Reply #45 on: February 22, 2007, 20:20 »
google helped me here mate

Tricketts Lane, Willaston, Nantwich, CW5 6PZ
01270 666 472
feed the soil not the plants
organicish
you learn gardening by making mistakes

*

ukpaul28

  • New Member
  • *
  • Location: crewe
  • 31
rotovator help
« Reply #46 on: February 22, 2007, 20:24 »
thanks for your help shaun, i will give them a call tomorow

thanks

*

Gwiz

  • Guest
rotovator help
« Reply #47 on: February 22, 2007, 22:00 »
pity you aint nearer...

*

ukpaul28

  • New Member
  • *
  • Location: crewe
  • 31
gwiz
« Reply #48 on: February 22, 2007, 22:06 »
thanks for that mate
its always the case  :roll:

*

ukpaul28

  • New Member
  • *
  • Location: crewe
  • 31
rotovator help
« Reply #49 on: February 23, 2007, 00:26 »
hi
i been racking my brain and when i took the spark plug into the shop (the one that was in it when i bought it of ebay a year ago),he said i need a new plug as that one is for the old fuel?? see i have never used it with my own petrol in it only what was left in it when i bought it, maybe am putting the wrong stuff in?? :roll:

*

LILACSPLASH

  • Full Member
  • **
  • Location: SUNNY??? CORNWALL
  • 59
rotovator help
« Reply #50 on: February 23, 2007, 16:38 »
Hi, if the carb gets gummed up and varnishy, OH puts the jets in malt vinegar over night, works for the bikes!
Someone take the spanners away from me!

*

Bigbadfrankie

  • Hero Member
  • *****
  • Location: SW Cornwall
  • 1647
rotovator help
« Reply #51 on: February 23, 2007, 22:58 »
I think all this is to deep, if it was starting a few days/weeks ago and the only change was the fuel it can only be fuel or a damp coil. put it all back as it was and start with the basics. Leave the plug out for an hour and try starting it.
always have a target
and an objective.

*

muntjac

  • Hero Member
  • *****
  • Location: near diss norfolk
  • 11971
rotovator help
« Reply #52 on: February 23, 2007, 23:06 »
oh and try this , take the plug and heat it up over a stove  pref gas if not just over the hob not touching it ( use gloves and pliers n get it back in afore it gets cold
still alive /............

*

ukpaul28

  • New Member
  • *
  • Location: crewe
  • 31
rotovator help
« Reply #53 on: February 25, 2007, 17:05 »
hi all
thanks for all your help , i have took it in the shop yesterday to get fixed hopefully it wont be long till its done :D

*

Gwiz

  • Guest
rotovator help
« Reply #54 on: February 25, 2007, 17:09 »
let us know what the problem was, and how much they charged you if thats ok?

*

ukpaul28

  • New Member
  • *
  • Location: crewe
  • 31
rotovator help
« Reply #55 on: February 25, 2007, 17:16 »
yeah will do, i asked him how much round about it would cost he said if i wanted to get it just started it would be about £35.00.
but i will let you know how much it was and what was wrong with it

*

ukpaul28

  • New Member
  • *
  • Location: crewe
  • 31
fixed
« Reply #56 on: March 01, 2007, 18:19 »
hi all
just to let you all know its been fixed today  :D

*

matfarrow

  • Newbie
  • *
  • Location: southeast cornwall
  • 9
rotovator help
« Reply #57 on: March 01, 2007, 18:40 »
how about easy start??squrt a bit on spark plug and in engine...keep pulling about 7 or 8 times with fuel cut off then take plug out and squrt degreaser on plug only. if you have good spark, drying the plug out and putting a bit of easy start in engine should at least make it cough keep trying this proccess for a while....make sure there is no dodo in plug gap. don't give up, you'll feel chuffed when it finally starts...believe me i've been there plenty of times. don't go too made with the easy start in the engine though.

*

matfarrow

  • Newbie
  • *
  • Location: southeast cornwall
  • 9
rotovator help
« Reply #58 on: March 01, 2007, 18:42 »
oh balls you've already fixed it.......

*

Gwiz

  • Guest
rotovator help
« Reply #59 on: March 01, 2007, 20:03 »
glad its fixed, but what did they say was wrong with it? :?:



xx
rotovator

Started by harry on Equipment Shed

15 Replies
5317 Views
Last post July 09, 2010, 12:33
by harry
xx
Rotovator Joy

Started by ex-cavator on Equipment Shed

4 Replies
2284 Views
Last post August 12, 2011, 23:04
by Paul Plots
xx
Rotovator

Started by rainman on Equipment Shed

2 Replies
2150 Views
Last post February 26, 2014, 16:09
by Swed
xx
jcb rotovator 3.5hp

Started by MrLeadfoot on Equipment Shed

3 Replies
7237 Views
Last post July 26, 2009, 08:23
by MrLeadfoot
 

Page created in 0.154 seconds with 39 queries.

Powered by SMFPacks Social Login Mod
Powered by SMFPacks SEO Pro Mod |