Newbie with Roto question

  • 8 Replies
  • 3027 Views
*

The Silver Surfer

  • New Member
  • *
  • Location: Andalucia Spain
  • 47
Newbie with Roto question
« on: February 25, 2013, 17:58 »
Hola todos,

I live in Andalucia Spain and have recently started gardening.  This is my second year now and I've been experimenting with what will grow in the 50C direct summer sun and -5C & snow in winter.  As I have quite a large amount of land I thought I'd expand on my experimental plot and go 'large'.  So I bought a cheap 2nd hand rotavator.

The issue I have is that there's no identifying make on it and I need to replace the two drive belts on it as they were missing (and work out how they're run!).  Can anyone please point me in the direction of where I can find a makers mark or where I might find supplies for this unidentified machine.  It does have 168FB on the petrol tank if that's any help.

Thanks in anticipation.

*

smud6ie

  • Senior Member
  • ****
  • Location: Monmouthshire SE Wales
  • 533
Re: Newbie with Roto question
« Reply #1 on: February 25, 2013, 20:15 »
Some pictures would be a good start for someone to try and identify your machine.
smud6ie

*

The Silver Surfer

  • New Member
  • *
  • Location: Andalucia Spain
  • 47
Re: Newbie with Roto question
« Reply #2 on: February 25, 2013, 22:29 »
Yes very good call!  I'll take and post some tomorrow then.

*

The Silver Surfer

  • New Member
  • *
  • Location: Andalucia Spain
  • 47
Re: Newbie with Roto question
« Reply #3 on: February 27, 2013, 14:48 »
I hope the photos work, I'm using a friend's photobucket.  I'd really like to know a make & model and if possible, obtain a manual for it please.







« Last Edit: February 27, 2013, 14:52 by The Silver Surfer »

*

DD.

  • Global Moderator
  • Hero Member
  • *****
  • Location: Loughborough. a/k/a Digger Dave. Prettiest Pumpkin prizewinner 2011
  • 30465
  • Pea God & Founder Member of The NFGG
Re: Newbie with Roto question
« Reply #4 on: February 27, 2013, 14:52 »
Mr Google tells me it could be this!

Hot Sell 168FB
Did it really tell you to do THAT on the packet?

*

The Silver Surfer

  • New Member
  • *
  • Location: Andalucia Spain
  • 47
Re: Newbie with Roto question
« Reply #5 on: February 27, 2013, 14:55 »
No that one has the drive belt located on the side, mine has two belts located just behind the motor, under the squarish red thing in the middle.

If anything it is nigh on identical to this one on fleabay;  http://www.ebay.co.uk/itm/230728429764?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

There seems to be a few companies who've branded this machine as their own and I guess ultimately it doesn't matter who's name is at the top of the user manual!

I did try contacting this seller about getting a copy of the manual, but they weren't interested unless I bought the machine from them!!!!!!!

I just found a yoootube link to an identical machine (-d1RFcux1Q4), so I guess Maxtra is the road to go down on my search.
« Last Edit: February 27, 2013, 15:37 by The Silver Surfer »

*

pipfit

  • Experienced Member
  • ***
  • Location: East Coast twixt Cromer and Gt Yarmouth
  • 135
Re: Newbie with Roto question
« Reply #6 on: February 28, 2013, 20:31 »
Silver surfer i have manual for this m/c and belts can be obtained from any good motor place

*

The Silver Surfer

  • New Member
  • *
  • Location: Andalucia Spain
  • 47
Re: Newbie with Roto question
« Reply #7 on: February 28, 2013, 20:45 »
Do you have an electronic version of it or just paper?  I'd be very grateful to get a copy from you in whatever format you can provide.

*

jezza

  • Hero Member
  • *****
  • 1605
Re: Newbie with Roto question
« Reply #8 on: October 01, 2013, 00:12 »
hi try belt B35 one for rota drive other for wheels if rota runs backwards its not broken some are designed this way  manufacterers reckon they work better in hard  soil jezza



xx
Tiller or roto

Started by Bozwell on Equipment Shed

9 Replies
4013 Views
Last post June 15, 2009, 11:31
by philskin
xx
Newbie need help with equipment choices

Started by gsc on Equipment Shed

3 Replies
1718 Views
Last post April 30, 2010, 09:47
by gsc
xx
Newbie needs help with briggs and stratton

Started by Daffy1977 on Equipment Shed

4 Replies
2377 Views
Last post May 19, 2010, 18:58
by Gwiz
xx
Advice for rotavator newbie

Started by raeburg on Equipment Shed

9 Replies
5475 Views
Last post April 06, 2009, 07:15
by Kristen
 

Page created in 0.157 seconds with 35 queries.

Powered by SMFPacks Social Login Mod
Powered by SMFPacks SEO Pro Mod |