Allotment Gardening Advice Help Chat
Chatting => Design and Construction => Topic started by: Aidy on June 26, 2012, 16:44
-
Got a bit of a project sometime this year, as above I am to build a new cycle shed with a new tool shed attached.
So my thoughts would be to build the frame work for the floor and then build each panel seperate as in a flat pack style and join the lot from inside.
One wall will be against the brick outbuilding and the long wall will be running along the fence see diagram....
(http://i133.photobucket.com/albums/q75/Aidypunk/shed-1.jpg)
Do we agree or is there a better of doing it?
-
I take it you mean building the floor base for the two areas in one unit? That's pretty much how I'd start. Just to be controversial, I think I might build the rear wall as two units and hoist it up, and then fit the uprights for the rest and build in situ
edit for bed spooling ::)
-
Have the door, opening out not in, or you cant put stuff behind it