[Motivator]

Hi all i have a old ATCO  with a kick start MK7  Villiers engine. Built 1960.
I need to change the rubber on the clutch/ Dog gear shaft. Is there a easy or a hard way.
I have a new rubber looks like it might need pressing off.

All advice welcome.

[jezza]

hi im trying to work out where the rubber goes on a dog clutch its usually two fiber rings with notchs cut out they slide together to make drive  .Try a parts supplier called MEETENS see if they can supply a parts diagram they usually can  jezza

[Motivator]

Hi Jezza i have the new rubber it sits on the shaft . Shaped a little like a star fish lol.

[smud6ie]

Hi all i have a old ATCO  with a kick start MK7  Villiers engine. Built 1960.
I need to change the rubber on the clutch/ Dog gear shaft. Is there a easy or a hard way.
I have a new rubber looks like it might need pressing off.

All advice welcome.

Could this have a centrifugal clutch and the rubber "starfish" is a part of a  cush drive coupling,got any pics?
smud6ie

[Motivator]

All went well had to unbolt the engine and BINGO Fairly straight forward , Mind you the 5/16 whit bolts
Where a tad tight.