[Ghost]

Hi

I've brought one of these at the weekend but there's no info with it about the opening temperature (the temperature it opens the vent at). I assume this is controlled but the thumb screw on the end. Does anyone have any advice?

http://www.argos.co.uk/static/Product/partNumber/7204517.htm

Thanks

[8doubles]

This time of year screw the wax cylinder in 10mm, you can wind it in further as the weather gets warmer.
Getting the locking pin though the lil` ole into the rod can be a pain.
Re-fitted mine this morning.

[Ghost]

This time of year screw the wax cylinder in 10mm, you can wind it in further as the weather gets warmer.
Getting the locking pin though the lil` ole into the rod can be a pain.
Re-fitted mine this morning.

So is that 10mm of screw of the cylinder showing out the back of the thumb screw? I have none showing out the back of the thumb screw at the moment and it started to open the vent when it was 26c in the greenhouse.

[8doubles]

The further the screw is wound in the quicker and further it opens, as long as the thread has 4-5 turns into the block and will not fall out it`s ok.
I like to build up some heat during the day to compensate for cold nights , like a night storage heater in reverse. 

[Ghost]

The further the screw is wound in the quicker and further it opens, as long as the thread has 4-5 turns into the block and will not fall out it`s ok.
I like to build up some heat during the day to compensate for cold nights , like a night storage heater in reverse. 

Thanks for your help.

Does your opener go fully straight in Summer (12 o clock position) ? Just wondering because my vent doesn't open straight so it's totally vertical (it gets to 10 o clock position not 12 o clock position) and I don't want the opener to damage it by forcing it in summer.

[8doubles]

Don`t worry they never open that far.