[shaun]

I can't tell you that!!!!....then Karl would know!

i wont say a word honest  

[agapanthus]

I can't tell you that!!!!....then Karl would know!

i wont say a word honest  

Ta! x

[shaun]

i bet yer now aggy he wont be lying in bed with a so called bad back anymore  :roll:  

[agapanthus]

i bet yer now aggy he wont be lying in bed with a so called bad back anymore  :roll:  

Dirty * Shaun!!! :shock:  

[shaun]

your going just like munty now  :roll: twisting things around  to make me look naughty  

[agapanthus]

your going just like munty now  :roll: twisting things around  to make me look naughty  

Sweetiepie....you need no help from me!!!!!! ;

[corndolly]

Agapanthus .. how much did that machine cost ? a rough figure will do ? and where do I get one?

 also what's its width?

Is it as good as it looks. We want a machine that can cope with clay soil, which you may know , gets a hard crust for top 1" or 4 , depending on the weather and how long its been  fallow.

What's its digging depth ?

Any ideas where I can go for more info about your massey ? Where I've looked I can only find Tractors !

[si-mate]

Should be able to get info from your local Massey Ferguson dealer.

Heres one I found from googling "massey ferguson groundcare"

http://www.rvwpugh.co.uk/groundcare.htm

[muntjac]

its a type 1 cutting width is 18" depth 12". try local massey ferguson dealer ask for rotavators of this type ,there are other types available including front mounted tines  as fer price ," :roll: i dunno  :roll:  or need to  

[weeeed]

Aggi you know the old adage treat em mean  and keep em keen!! How ever if you go spoiling him with equipment like that you wont have to worry!  

[shaun]

so have you used it yet karl or are you still sitting there polishing it  

[muntjac]

yehhhhhhhhhhhhhhh ITS LUVERLYYYYYYYYYY      AND IT LEAVES IT FLAT  

[shaun]

thought aggy might have done a video of you using it,i'm in the mood for a good laugh  

[agapanthus]

thought aggy might have done a video of you using it,i'm in the mood for a good laugh  

I've been reading the manual on the cheapie camcorder I got......well put it this way, Got to page 3 and am no wiser on how to use the damn thing

[muntjac]

okay so as you know aggy bought me a new rotavator last year ....... well here is the report on its capability to do the job ,,,,,,,,,, .......... it is not capable by any means . possibly 40 hours work ( and thats being massivly genorous )and its been back in the shop 6 times after wrecking 6 fan belts . now finally after this last time i told them to take it back .... the problem has been the same all the way through .maybe getting into working about an hour the fan belt shreds . takes a week to be returned on most occasions  so all the good weather is lost ( when we had it ) now i am not getting at REEKIES OF CUPAR  FIFEfor the bad performance of the machine by any means they have done thier utmost best to sort it . it transpires that when under torque the fan pulley is out of alignment .. when we got the machine it wouldnt dig in due to the miniscule depth skeg.so after i instructed them to modify it it did work well but lo and behold the belt broke about a half hour into me stating working after they had left...in my personal opinion i think MASSEY FERGUSON did not do any test work on the prototype to see if it functioned properly .if they had i am certain they wouldnt have had these problems . now the honda engine is fantastic . but unfortunatly the machine itself is not upto the job . why am i telling you this well i told REEKIES i would be writing a report on it for this site . and i would advise anybody looking to buy one of these machines to look elsewhere for a new rotavator until massey ferguson address the problems  and test it before putting it on the open market.. NOW LOOKING FOR A NEW ROTAVATOR AS HAND DOUBLE   DIGGING IS KILING MY BACK AND MY PLEASURE IN GARDENING