Allotment Gardening Advice Help Chat
Chatting => Equipment Shed => Topic started by: vauxhall on April 27, 2010, 09:14
-
I have a Mountfield M1 Super Rotavator which requires new Drive Belts. The existing ones, which, to see, look as if they are just like car fan belts, are damaged such that I cannot work out what their length should be. At a guess they would be between 650 and
750 mm. (outside measurements)
The width is easy - 13mm.
The length must be accurate or the clutch will not work properly.
Can anyone advise the size required?
-
There are several for sale on ebay. 18" is the length quoted.
-
The belts you require I believe are part number MX206
the size number of these belts are A25
You can obtain these at any belt dealer in the land
but I think the best dealers are called ERIKS
Hope this helps