[BazzaRich]

Need some spare parts if ayone has an old one - Belvue washers from the handle assembly which allow the toggle bar to compress and hold the handle at an angle, also I have 1 pin from that assembly broken - spiral pin.

Even ideas where we can but spare parts would be useful.

The old beauty keeps going and is easy to start but needs a bit of TLC at the present!!

[R Tallentire]

Mountfield are still trading so it is worth trying Mountfield agents. If that does not work, the parts you quote are standard engineering items. Belville washers and Spirol pins are available from engineers merchants such as Eriks and Bearing Services. Note that roll pins are not as strong as Spirol pins and they are available in different shear strengths. Also exact sizes are needed as a 6mm pin would be slack in a ¼” hole.

[BazzaRich]

Thanks - have found a good fastener supplier locally so all done, but I have mislaid my ploughing bar? could make one but any ideas who might have one?

[arugula]

Mountfield are still trading so it is worth trying Mountfield agents.

As R Tallentire says, you should be able to contact a supplier.