[Cultivator man]

Hi

Do you have anything on the Mountfield M1 cultivator? I have a parts manual but its missing pages A3 and A4

[arugula]

Hi

Do you have anything on the Mountfield M1 cultivator? I have a parts manual but its missing pages A3 and A4

Have a look here:

http://www.allotment-garden.org/rotovator/index.php

[rotavatoramersh]

HI

I am having trouble getting my machine started and wondered if anyone out there had any experience of this machine.
I have put a new spark plug on but it almosts looks like it has been put on backwards. Does anyone have a manual for the engine which is a JAP one.
I'd be grateful for any help as now the weather is nice i want to get out and do some work but the fact the machine doesnt work is a bit of an issue.
Im sure it is just something simple if only i could work out what.
I have worked on a lot of machines esp lawnmowers and always got them working nicely but this one has me stumped.
Kindest regards
Sean

[Gwiz]

You would do well, I think, if you got in touch with "Meetens" who may be able to supply you a manual for your engine. They may very well have parts for your engine too. Worth a go.
I believe that they are still in Epsom In Surrey.

[AlanSmith]

I've just bought a Qualcast Cultimatic Deluxe on ebay, but it didn't come with an instruction booklet. ( Briggs & Stratton 4HP engine )

Does anyone have a copy they could email me?

It seems in decent condition (starts 1st time), but the clutch cable could do with being adjusted as it's too loose.

Also ... can I use unleaded petrol in this model? I've looked all over the engine but cannot see a model number anywhere.

Thanks

Also, a bit of an explanation would be good. It has an arm on one handle for adjusting between stop and fast. It also has a bicycle type lever on one handle, which when pressed makes the blades spin, but it also has another brake type handle on the the other side. whats that for?This was a bit loose, but it appears to push a bar down onto the rubber belt.

### found the code!

Model 100232
Type 0564 01
Code 78091507

[smud6ie]

Would it be posible to have the link to the manuals in the first post in this thread or a sticky pointing to it? instead of drilling down to the fifth post to find it.

smud6ie

[Gwiz]

Of course it would, and a sensible idea it is too.
No sooner said than done.

!st post now has a link to the right page.

[smud6ie]

Of course it would, and a sensible idea it is too.
No sooner said than done.

!st post now has a link to the right page.

Thats easier,thanks
smud6ie

[09viewlake]

Newbie here desperately seeking......a manual for my Qualcast Cultimatic Super! I acquired it from the bay 18 months back and have been playing tunes on the carb to get it to start!Finaly (after busting and replacing the recoil starter) got it going yesterday  after re-gapping and cleaning the points. In an earlier post (11/2011) there was mention of a manual being scanned but I can't see one on the list of Old Rotovator Manuals? Any help would be much appreciated. 

[arugula]

Newbie here desperately seeking......a manual for my Qualcast Cultimatic Super!

Hi and welcome. Does your Qualcast have a Briggs and Stratton engine covered by one of those manuals?

[09viewlake]

I'm ok on the engine - it's a Suffolk 98g14. It's the chassis and drive/skid/transport wheels set up I am looking for and how to choose the drive pulleys for type of work etc - effectively how to use it and what attachments were made available.

[Gwiz]

Regretfully, if it's not on the list then we haven't got one.
UNLESS, some kindly soul sees your post and offers one for the collection.....

[09viewlake]

On this topic on 5 Oct 2011 JOHN (Administrator) posted:

"I sent a rotovator manual - Qualcast Cultimatic Super - to John Harrison early in August together with a stamped addressed envelope for return but so far nothing. Shame if it's lost - I didn't keep a copy.

Hi Doug - good news, it had gone into the wrong postbox. There's an empty property up the hill and we checked its box which was filling. Redistributed the contents to the right houses. So, thanks for the note which made me check. I'll get it scanned this week and back in the post to you."

I sort of hoped that the intention was to add it to the list of manuals?

[Gwiz]

Good point well made.
Maybe it hasn't been put on the website as yet.
I'm sure that John will be able to confirm.

[John]

I'm afraid the developers may have missed the file when they did the new site. 8 months on and I'm still finding fault after fault. Trying to get things put right.