Re-engineering a greenhouse

  • 11 Replies
  • 5165 Views
*

Aidy

  • Hero Member
  • *****
  • Location: Born n bred Lancastrian living in tropical Blackpool
  • 5783
    • Aidy Neal Photography
Re-engineering a greenhouse
« on: April 22, 2008, 13:05 »
been given a greenhouse, very odd size and the glass is 29inch sq, problem is there is 4 panes missing, so just rang around and I am looking at £46 for replacement,  :shock:  now Iam thinking this greenhouse is to be used as a nursery greenhouse, so now I am thinking of re-engineering the frame to cut it short by a section, anyone done this, I figure 5 cuts should do the job.
Punk isn't dead...it's underground where it belongs. If it comes to the surface it's no longer punk...it's Green Day!

*

Bear

  • Full Member
  • **
  • Location: Hertfordshire
  • 85
Re-engineering a greenhouse
« Reply #1 on: April 22, 2008, 14:24 »
£46 doesn't sound too much to me.

Other choice is to pick up some twin wall polycarbonate sheeting from DIY place. I use it to replace panes in my greenhouse. It not see through like glass but it does a good job.

I just picked up a great big sheet of it half price in Wickes - £20.

*

Aidy

  • Hero Member
  • *****
  • Location: Born n bred Lancastrian living in tropical Blackpool
  • 5783
    • Aidy Neal Photography
Re-engineering a greenhouse
« Reply #2 on: April 22, 2008, 16:48 »
Quote from: "Bear"
£46 doesn't sound too much to me.


 :shock:  Based on an average pint at £1.70 = 27 pints, and thats not too much  :shock:  :shock:  :shock:  think the hacksaw blades are the cheaper option, Cheers anyway but not convinced  :wink:

*

GrannieAnnie

  • Grandmother of the Forums
  • Hero Member
  • *****
  • Location: Kent
  • 21104
Re-engineering a greenhouse
« Reply #3 on: April 22, 2008, 16:55 »
Got a glass cutter Aidy?  Brian cuts all our new glass from the secondary glazing they chuck out at the conservatory place!

*

Gwiz

  • Guest
Re: Re-engineering a greenhouse
« Reply #4 on: April 22, 2008, 18:18 »
Quote from: "Aidy"
been given a greenhouse, very odd size and the glass is 29inch sq, problem is there is 4 panes missing, so just rang around and I am looking at £46 for replacement,  :shock:  now Iam thinking this greenhouse is to be used as a nursery greenhouse, so now I am thinking of re-engineering the frame to cut it short by a section, anyone done this, I figure 5 cuts should do the job.


I cut an 8x4 down to an 4x4 ( lack of space at home)
t'were a pain in the whatsit to do, and should have
been easier.
don't do it, mate. buy/scrounge/ aquire the glass.

*

shaun

  • Hero Member
  • *****
  • Location: g.sutton/cheshire
  • 6948
Re-engineering a greenhouse
« Reply #5 on: April 22, 2008, 18:54 »
if the glass is missing on the sides or end it wouldnt be the end of the world if you used plywood,especially on the north facing side  :wink:
feed the soil not the plants
organicish
you learn gardening by making mistakes

*

Aidy

  • Hero Member
  • *****
  • Location: Born n bred Lancastrian living in tropical Blackpool
  • 5783
    • Aidy Neal Photography
Re-engineering a greenhouse
« Reply #6 on: April 24, 2008, 10:17 »
ok, having checked it out, thought long and hard, drunk a bit, thought about it again, had a chat with a retired glass chap who will cut me glass we have come up with a cunning plan  :D  each section is 29 inch in width, we are going to reduce one to the standard 24inch, this will give us the glass required for the other sections, I have loads of 24inch glass so should be ok. Oh I do hold O level Engingeering Workshop Practice, but that a long time ago  :? So this weekend will be the one, got lots of beer in just need the sun  :lol:

*

Aidy

  • Hero Member
  • *****
  • Location: Born n bred Lancastrian living in tropical Blackpool
  • 5783
    • Aidy Neal Photography
Re-engineering a greenhouse
« Reply #7 on: April 27, 2008, 18:43 »
well. its sorted, took just over an hour to cut, drill and re-bolt it back together. Just need to alter the base now and I can glaze it. So I did learn something at school after all  :roll:

*

jack russell

  • Hero Member
  • *****
  • Location: Co. Durham
  • 1023
Re-engineering a greenhouse
« Reply #8 on: April 27, 2008, 20:02 »
you know the LAW Aidy there must be pictures added :wink:

rule number 23
http://i137.photobucket.com/albums/q230/jack-russell_2007/CIMG1386.jpg[/img]http://i137.photobucket.com/albums/q230/jack-russell_2007/roostertop-1.jpg[/img]


not organic    but still a nice bloke

*

Aidy

  • Hero Member
  • *****
  • Location: Born n bred Lancastrian living in tropical Blackpool
  • 5783
    • Aidy Neal Photography
Re-engineering a greenhouse
« Reply #9 on: April 28, 2008, 20:58 »
no problem, give me a couple of days.

*

weeeed

  • Senior Member
  • ****
  • Location: Hull, East Yorkshire
  • 533
Re-engineering a greenhouse
« Reply #10 on: April 29, 2008, 12:18 »
Who's a clever boy then. Well done you :wink:
I know less today than I did yesterday, and I knew nothing then!

*

Aidy

  • Hero Member
  • *****
  • Location: Born n bred Lancastrian living in tropical Blackpool
  • 5783
    • Aidy Neal Photography
Re-engineering a greenhouse
« Reply #11 on: May 06, 2008, 13:48 »
Got round to finally glazing it, one pane broke in half as I was inserting it into the roof, not sure what happened other than 1 minute it was in one piece and as I lifted it, it snapped in half, fell, hit the step ladder inside bounced off that and hit the two side panes, 3 F iiiiiiiinnnnnnnnnggggggg panes of glass went in one go, so I was in the same position as before I started, one chap came running over to see me having a smashing time and offered some polycarb sheeting. So I now have me nursery greenhouse up with me little seedlings happy as pig in muck.


question
Used greenhouse

Started by Windsong on Design and Construction

11 Replies
5720 Views
Last post March 29, 2011, 17:08
by Trillium
xx
eco greenhouse

Started by gladis on Design and Construction

13 Replies
5583 Views
Last post February 24, 2011, 15:19
by grinling
xx
Greenhouse Help

Started by dcleak on Design and Construction

12 Replies
4514 Views
Last post March 21, 2012, 20:24
by dcleak
xx
DIY Greenhouse

Started by mum2many on Design and Construction

12 Replies
10806 Views
Last post February 26, 2007, 22:12
by noshed
 

Page created in 0.119 seconds with 29 queries.

Powered by SMFPacks Social Login Mod
Powered by SMFPacks SEO Pro Mod |