New bike shed/ tool shed build

  • 2 Replies


  • Hero Member
  • *****
  • Location: Born n bred Lancastrian living in tropical Blackpool
  • 5694
    • Aidy Neal Photography
New bike shed/ tool shed build
« on: June 26, 2012, 16:44 »
Got a bit of a project sometime this year, as above I am to build a new cycle shed with a new tool shed attached.
So my thoughts would be to build the frame work for the floor and then build each panel seperate as in a flat pack style and join the lot from inside.

One wall will be against the brick outbuilding and the long wall will be running along the fence see diagram....

Do we agree or is there a better of doing it?
Punk isn't's underground where it belongs. If it comes to the surface it's no longer's Green Day!



  • Guest
Re: New bike shed/ tool shed build
« Reply #1 on: June 26, 2012, 16:51 »
I take it you mean building the floor base for the two areas in one unit? That's pretty much how I'd start. Just  to be controversial, I think I might build the rear wall as two units and hoist it up, and then fit the uprights for the rest and build in situ

edit for bed spooling ::)
« Last Edit: June 26, 2012, 20:41 by Gwiz »



  • Senior Member
  • ****
  • Location: Heathrow
  • 876
Re: New bike shed/ tool shed build
« Reply #2 on: June 26, 2012, 20:12 »
Have the door, opening out not in, or you cant put stuff behind it
If Its Not Growing... Its Dead.


Page created in 0.117 seconds with 35 queries.

Powered by SMFPacks Social Login Mod
Powered by SMFPacks SEO Pro Mod |