[Gwiz]

between 4 and 5 hp

[Al5401]

And.....How did you do that?

[Gwiz]

i phoned a friend :oops:

[Al5401]

HeHeHeHe,
Don't be embarrassed - I tried a lot of friends, all as befuddled as me.

[Bigbadfrankie]

A calculation wont do it. The 144cc with honda is 3.5hp - 4.5hp The GX140 is not currently listed but 4hp is a safe bet as theGX120 is 3.5hp and the GX160 is 5.5hp. The latest are iGX. Mine is a "G" series 144cc.

[Al5401]

Cheers mate,
Knew someone would give me an answer - and they're all about the same at 4 (ish)bhp.

[Bigbadfrankie]

http://www.honda-engines-eu.com/en/welcome.html

If you put your engine spec in on this page you can get the drawings of it.

[Al5401]

Tried that one already BBF - it goes from Gx120 to GX160 with no 140 in the middle.

[shaun]

ive got a 140 on my wacker plate and its say 4.5hp

[Bigbadfrankie]

go service, spares, gx140 then "Q1"`as all rotators are Q engines. Granted theres only 1 but its there.

[bert]

hi if interested there are user,s manuals on ebay for a HONDA f200 ,310,410,501,610,800 rotavators

[Bigbadfrankie]

to expensive

[Al5401]

Thanks for that BBF (and Bert) although already received a manual.
Have had a good look at the site you mentioned BBF and went through all the rigmarole...pity they don't give out the prices of the various spare parts until you order them!

[Blacksmith]

Hi all

Just joined the forum and have a small Q about the Honda f501 tiller (which I'm also new to).  Is it designed to be used always with the discs attached outside the tines or are these just for certain jobs, e.g. tilling in between rows?

Thanks

Mike

[Gwiz]

You can remove them if you want to