Missing connectors for greenhouse

  • 7 Replies
  • 2751 Views
*

Alyson22

  • Newbie
  • *
  • Location: Hindley Green, Wigan
  • 4
Missing connectors for greenhouse
« on: January 24, 2017, 11:20 »
Hello, I am new to the site and new to growing my own too! Started last spring with some raised beds, with some successes and some failures! have been lucky enough to be given a greenhouse that was dismantled. It's taken me a while to work out which bit went where but I have finally cracked it, only to find 2 connecting parts missing, a corner connector and a roof one. I have spent hours on the internet and cannot locate the parts anywhere. It doesn't help as I don't know what make it is, there are no labels on it. Wonder if anyone can give me any advice if you have had the same problem. The parts are I think made of metal not plastic. Regards Alyson

*

mumofstig

  • Global Moderator
  • Hero Member
  • *****
  • Location: Kent
  • 57964
Re: Missing connectors for greenhouse
« Reply #1 on: January 24, 2017, 14:39 »
Take some pictures of the greenhouse, useful to ID the brand, and the connections you do have and we may be able to help.

Welcome to the forum by the way  :)

*

Alyson22

  • Newbie
  • *
  • Location: Hindley Green, Wigan
  • 4
Re: Missing connectors for greenhouse
« Reply #2 on: January 25, 2017, 08:33 »
Thank you Lesley.  I have got pictures but I cant get them to load off my iPad onto here, followed the instructions I found on another forum post but not successful.  I will get on my pc later today and try that method instead

*

mumofstig

  • Global Moderator
  • Hero Member
  • *****
  • Location: Kent
  • 57964

*

Alyson22

  • Newbie
  • *
  • Location: Hindley Green, Wigan
  • 4
Re: Missing connectors for greenhouse
« Reply #4 on: January 25, 2017, 17:05 »
Yes that was the post I read thanks and I consider myself to be quite PC savvy but it didn't work!  have just uploaded some photos onto the gallery so when they are approved I will try to get them posted on here - hopefully

*

mumofstig

  • Global Moderator
  • Hero Member
  • *****
  • Location: Kent
  • 57964
Re: Missing connectors for greenhouse
« Reply #5 on: January 25, 2017, 20:07 »
I've approved them for you  ;)

*

Alyson22

  • Newbie
  • *
  • Location: Hindley Green, Wigan
  • 4
Re: Missing connectors for greenhouse
« Reply #6 on: January 26, 2017, 08:15 »
Thankyou Lesley!  Hope I copied the right links onto here of my greenhouse pictures.  If anyone can assist me in identifying the make of this greenhouse or giving me any advise on where I can get the 2 connector pieces I am missing, I would be immensely grateful.  I am willing to have a go at making these if all else fails and wonder If anyone has done that who could guide me on best method/materials to do that too.






edit to embed gallery pictures
« Last Edit: January 26, 2017, 12:47 by mumofstig »

*

Growster...

  • Hero Member
  • *****
  • Location: Hawkhurst, Kent
  • 13162
Re: Missing connectors for greenhouse
« Reply #7 on: January 26, 2017, 11:59 »
Hi Alyson and welcome!

You could try talking with Two Wests and Elliott.

They're specialists, and have all sorts of kit for aluminium greenhouses, plus lots of other stuff!.

www.twowests.co.uk

They have a great catalogue too, which is good for ideas!

Best of luck!




clip
Wilko Tomato Greenhouse missing instructions

Started by AllStar on Design and Construction

2 Replies
3352 Views
Last post June 21, 2020, 19:07
by Yorkie
xx
my new greenhouse

Started by new_2_veg on Design and Construction

8 Replies
2696 Views
Last post February 11, 2010, 16:58
by new_2_veg
xx
My new greenhouse

Started by noshed on Design and Construction

2 Replies
2081 Views
Last post January 06, 2018, 13:28
by rowlandwells
xx
Old Greenhouse

Started by Fluff on Design and Construction

1 Replies
2418 Views
Last post August 25, 2008, 23:09
by richyrich7
 

Page created in 0.154 seconds with 39 queries.

Powered by SMFPacks Social Login Mod
Powered by SMFPacks SEO Pro Mod |