I got a rotavator I got a rotavator Can any one help

freyaluck · « **on:** March 20, 2007, 20:50 »

Well after months of waiting I have finally got a rotavator from Freecycle

Can you tell I am chuffed!
It doesn't work YET , but give me, jon and me dad a week and it'll be going I hope :?
Think its a briggs and stratton :?: Can't remeber exactly.
The gentleman was lovely and I really want his house It was in the most amazing location on top of a valley, totally isolated in the middle of no-where. It was a bit scary at times trying to reach it going up about 1/2 a mile of steep bumpy track :shock: In our old serena was not the best vechile for the job. So Not only did I want his rotavator I want his house too.

right I'll stop waffleing now

WG. · « **Reply #1 on:** March 20, 2007, 20:52 »

I'm sure if you ask him nicely, he'll give you a call before he puts his house on Freecycle

shaun · « **Reply #2 on:** March 20, 2007, 20:55 »

nice one frey when you get a mo get a piccy sorted and welcome to the rotavator club

freyaluck · « **Reply #3 on:** March 20, 2007, 20:58 »

Quote from: "whisky_golf"

I'm sure if you ask him nicely, he'll give you a call before he puts his house on Freecycle

Only In my wildest dreams :cry: :cry: :cry:

Quote from: "shaun"

nice one frey when you get a mo get a piccy sorted and welcome to the rotavator club

Cheers shaun will do when Jon get back from footie still in the boot of the car :oops:

richyrich7 · « **Reply #4 on:** March 20, 2007, 21:09 »

WTG freyaluck I got mine from freecycle to, did'nt need much to get it running. Hope to see some pics soon

leeky · « **Reply #5 on:** March 20, 2007, 21:35 »

good score! Ive had a rotovator Ad on my local freecycle for a while now, but no responce ...yet

freyaluck · « **Reply #6 on:** March 20, 2007, 21:42 »

I have done a few adds over the last few months and also seen a few offers - but never got their in time - bit annoying really as one was offered just a couple of hours after I posted a wanted a month or so ago, but patience got me their in the end

This time I was lucky

keep trying leeky i am sure one will find it's way to you.

freyaluck · « **Reply #7 on:** March 31, 2007, 19:12 »

Finally got my camera sorted so heres a piccy. Carling Jon decidd it would be a good idea to take the pully cover off :roll: and has now
decided he cant get the spring to coil again :?
I am sure all it needed was a bit of wd40.. Dad is hopefully coming over tomorrow to have a looksie- although he sais that last saturday too :x
Well here are the piccies

shaun · « **Reply #8 on:** April 01, 2007, 01:10 »

know what you mean they are a begger to get back on but once you have done it its a doddle the secret is,you need 2 pair of hands

and when hes doing it tell him to keep his tongue in

Gwiz · « **Reply #9 on:** April 01, 2007, 06:40 »

next time, take the enginge cover off, turn upside down, squirt oil into large hole in the centre of the recoil (wd40 to start with) leave over night, refit.
thems springs can be a right *. where some eye protection when fiddling with them.
i find winding them up outside of the recoil housing, as small as i can, then holding it with pliers as i refit it, works for me.

freyaluck · « **Reply #10 on:** April 01, 2007, 10:57 »

Cheers for the tips.
Dad has promised to pop over this afternoon, so will hopefully make it this time as I really want to get the lottie finished.

freyaluck · « **Reply #11 on:** April 01, 2007, 19:24 »

After a long afternoon of hard graft by my old man, still no life in ye olde begger.
Does anyone know where maybe I could get a manual for it, have tried the briggs and stratton site to no avail, doesn't help that Although have found several numbers none of them seem to be the model number.
Basically spark plug is ok we are pretty sure. Could it be the magneto :?: :? Any ways hew will hopefully be back within the next week to have another look, but wandering if any of your expertise could help us.
We have freed the inlet valve (was sticking), de coked all that bit too. sorted the spool, cleaned up all the earths checked fuel flow, changed the oil, sorted some bearing s out :?: think was about it. She does wanna go now and turn over, but she will not fire :cry:
Ant ideas anyone.
Cheers
Carlie

richyrich7 · « **Reply #12 on:** April 01, 2007, 20:15 »

The engine on yours looks very similar to mine, I have a owners manual for that if it's any help. But all it shows is just general maintenance and how to adjust carb etc. If you want it PM me with your email addy and I'll send it.
Rich

mandycharlie · « **Reply #13 on:** April 01, 2007, 20:19 »

freyaluck

I think you just spoke a foreign language to me.. :?

but I wish you all the best to get your rotavator going

shaun · « **Reply #14 on:** April 01, 2007, 20:22 »

Quote from: "mandycharlie"

but I wish you all the best to get your rotavator going

can you get a greeting card saying that cus you can get a card for everything else

rotavator Id please Started by philymon on Equipment Shed	7 Replies 2730 Views	February 10, 2009, 17:49 by philskin
jcb rotavator Started by btibbs on Equipment Shed	4 Replies 2737 Views	February 03, 2015, 19:15 by btibbs
got another rotavator Started by philskin on Equipment Shed	27 Replies 6919 Views	January 24, 2010, 15:58 by philskin
ROTAVATOR Started by berttimms on Equipment Shed	4 Replies 2631 Views	January 02, 2009, 19:29 by Gwiz

I got a rotavator I got a rotavator Can any one help

WG.

Gwiz