[North]

  ...Upgraded my Plough to a real japanese . Some Pictures .

[Bigbadfrankie]

That a very good and useful upgrade. You can now take smaller bits at the ground when  the going gets tough. I find about 5 to 6 inches from the inside of the tyre is enough. On fixed plough that means narrowing the wheel on the axle .
I bought a new coil from a cd175 and used a 6v battery for power and old girl ran very well. So I am o a mission to mount the Battery and the use the 6v system that powered the lights to charge the battery  Hopefully back to full working order early next week.Then off to plough a very neglected garden.

[North]

  .Thanks for the tips about the Plough,there is not much information about the japanese Plough.  Good to hear your machine is running. Power from light must be AC i think so it must be converted to dc and regulated so the battery not start to boil away.

[R Tallentire]

The smaller Merry Tiller wheels had the holes for the rotor pins slotted to give some "differential effect". The 16" ones for Titans had ratchets like those for the Mountfield, but the 22" wheels, which were only available in the 1980s for Titans, had a similar set up to those shown on your photo. A Titan GT with independently clutched right and left rotor shafts got into 1983 brochures, but I don't think any reached the showrooms.

[North]

  ...Tested my upgraded Plough, works very well  .Some Pictures..

[Bigbadfrankie]

That looks great. You have done a good job making the plough. Just in time to turn the ground for winter. Video footage of it in action next. Do you have plans for any other tools

[North]

  I Think i have the most Tools now. Plough ,ridger  and a harrow . Donīt know how to upload an actionvideo, maybe harder than it is to build a Plough 

[North]

  I fix an actionvideo  . Needed to balance the machine with some bricks ... Little spooky video cant se any person steering hondan    ...it is a selfploughing machine i suppose 

b_Qkvg3A5yI

[Bigbadfrankie]

Very good. Do you normally go faster?

[North]

  This speed first low gear was just for the video . Normally i use the second low gear so i get more speed, i see the Plough works better with higher speed.