[Timmo63]

Hi, this is my first post to the site. I have picked up an Apache Euro1 cultivator for the princely sum of £25 it runs well and has got lots of power, the engine is a Briggs and Stratton, however the front wheel assembly needs a little TLC. I have had a look at the newer models but the wheel attaches via two arms which bolt on to each side of the unit at the front, mine on the other hand has to slot on to a plate and is secured with a bolt which is not present. I am not able to fine a model number or any other identification to it's age or exact model, what I am after is an operating manual and spare parts list to see if I can get a new wheel assembly, also I would like to take the tine assembly off so that I can clean and sharpen them.

any help that can be offered would be great,
Thank you

Timmo

[shedmeister]

As long as the engine is original. The type model ect numbers are stamped ont the front of the engine cowel (the bit that the pull start is attached to. Google should do the searching for you

[Timmo63]

Many thanks for the info Shedmeister, got the manual for the engine but i'm still trying to find a manual for the actual cultivator.