Allotment Gardening Advice Help Chat

Chatting => Equipment Shed => Topic started by: derekmc on March 23, 2016, 14:09

Title: landmaster 100
Post by: derekmc on March 23, 2016, 14:09

Have any members had one where did they get spares this is my next project. Also What Briggs Engine size was used?

Title: Re: landmaster 100
Post by: R Tallentire on March 24, 2016, 22:30

I doubt if you will get spares for it. Landmasters were made by Firth Cleveland, the bolt makers, but either taken over or at least marketed by Webb/Atco in the 1980s, by then the 100 was long gone, though the model 88 looks similar. Your engine looks like a 3hp, though the 2.5hp engine shares the same block casting so it is difficult to tell them apart without the fan cowl, which is stamped 80202 for 3hp and 60202 for 2.5hp models.