Merry Tiller Super Major; Attachments

  • 5 Replies
  • 3073 Views
*

PIMBO

  • New Member
  • *
  • Location: Upholland,Skelmersdale, West Lancashire
  • 13
Merry Tiller Super Major; Attachments
« on: June 22, 2011, 14:45 »
I own a Super Major with the Ridging Attachment. Unfortunately, I cannot make it work and do not have any instructions for setting up and operating. The handbook provided with the Super Major does not include guidance for this attachment.
Can any one help please.
pimborooney

*

R Tallentire

  • Experienced Member
  • ***
  • Location: Lancaster
  • 173
Re: Merry Tiller Super Major; Attachments
« Reply #1 on: June 22, 2011, 19:47 »
The ridger/furrower attachment is a very simple device, but does need a toolbar  and clamp(s) to go between the furrower and the hitch casting on the Merry Tiller. These pictures from the brochure show the two different toolbars. The makers also advised the use of 10 solid  or 12 pneumatic wheels and tyres in place of the rotors to pull the machine along. The only adjustment is to the depth it is set and the angle of the wings on the big  furrower.
Standard toolbar & furrower.jpg
Heavy duty toolbar & furrower.jpg
R Tallentire

*

PIMBO

  • New Member
  • *
  • Location: Upholland,Skelmersdale, West Lancashire
  • 13
Re: Merry Tiller Super Major; Attachments
« Reply #2 on: June 23, 2011, 00:51 »
The ridger/furrower attachment is a very simple device, but does need a toolbar  and clamp(s) to go between the furrower and the hitch casting on the Merry Tiller. These pictures from the brochure show the two different toolbars. The makers also advised the use of 10 solid  or 12 pneumatic wheels and tyres in place of the rotors to pull the machine along. The only adjustment is to the depth it is set and the angle of the wings on the big  furrower.

Hello RT
I have all of the fixing gear except the Wheels to replace the rotors. I will have to persue the availability of these.
Many thanks................PIMBO

*

smud6ie

  • Senior Member
  • ****
  • Location: Monmouthshire SE Wales
  • 531
Re: Merry Tiller Super Major; Attachments
« Reply #3 on: June 23, 2011, 09:15 »
The ridger/furrower attachment is a very simple device, but does need a toolbar  and clamp(s) to go between the furrower and the hitch casting on the Merry Tiller. These pictures from the brochure show the two different toolbars. The makers also advised the use of 10 solid  or 12 pneumatic wheels and tyres in place of the rotors to pull the machine along. The only adjustment is to the depth it is set and the angle of the wings on the big  furrower.

Hello RT
I have all of the fixing gear except the Wheels to replace the rotors. I will have to persue the availability of these.
Many thanks................PIMBO
These usually make between 55 and 85 if they have the extention axles,couple of sets for auction at the moment.
smud6ie

*

Fen

  • Experienced Member
  • ***
  • Location: Five feet above sea level, between Ely and Cambridge
  • 101
Re: Merry Tiller Super Major; Attachments
« Reply #4 on: June 23, 2011, 22:29 »
I used one quite successfully by using just two rotors, one each side of the drive. A bit physical to control but with a bit of practice did a good job.

*

PIMBO

  • New Member
  • *
  • Location: Upholland,Skelmersdale, West Lancashire
  • 13
Re: Merry Tiller Super Major; Attachments
« Reply #5 on: June 24, 2011, 18:51 »
Many thanks to all who have replied to my plea for help
PIMBO



xx
Merry Tiller 4hp Major

Started by johnp on Equipment Shed

1 Replies
1090 Views
Last post July 16, 2007, 22:02
by bikerjohn
xx
merry tiller major

Started by lydenburg on Equipment Shed

0 Replies
801 Views
Last post March 05, 2012, 15:09
by lydenburg
xx
oil for merry tiller major

Started by broxibear on Equipment Shed

3 Replies
1936 Views
Last post March 29, 2008, 14:36
by andyk
xx
Merry tiller Major

Started by Richard Davis on Equipment Shed

7 Replies
2335 Views
Last post January 03, 2007, 19:30
by Gwiz
 

Page created in 0.073 seconds with 34 queries.

Powered by SMFPacks SEO Pro Mod |