Introducing the g.easel or g.adder for 2018, its a 4 in 1 solution

  • 0 Replies
  • 124 Views
*

no_akira

  • New Member
  • *
  • Location: Essex (West)
  • 30
    • Open book paired planting beds
Its a 4 in 1 design; #1 Compost bin ladder, #2 Bean frame (curved), #3 Wind break, #4 Seedling Cloche. Dimensions are approx 2.5' x 6.5' or 0.76m x 2m.

All held together with x4 Turbocoach screws that can be driven in without pilot holes straight throu the metal tubes into the battens. A quick tap on the turboscrew with a hammer to puncture the metal is all that is required.

Because of the issues I felt I had with the preservative on the wooden batens or the soft HDPE plastic grid that I used on the 2017 mk1 design, I'm hoping to be as "inert" as possible, untreated batons and old galvanised heras panels.

Regards naming its either a g.easel = gardeners Easel or a g.adder = gardeners ladder as the hook part of the design looks like fangs on a viper or Adder.

Or any suggestions for a name ?
geasel_02c_ladder_b.jpg
geasel_03c_windbreak.jpg
geasel_01c_beanframe.jpg
geasel_04c_cloche.jpg
« Last Edit: December 05, 2017, 19:31 by no_akira »

 

Page created in 0.054 seconds with 30 queries.

Powered by SMFPacks SEO Pro Mod |